DJI Mavic 2 Pro и Zoom инструкция на английском - страница 22

Предыдущая страница (21)
Страница из 67
Следующая страница (23)
Предыдущая страница (21)
Страница из 67
Следующая страница (23) 
                    Mavic 2 Pro/Zoom User Manual
Follow the steps below to use the Downward Vision System:
1. Ensure the aircraft is in P-mode and place the aircraft on a flat surface. Please               T  P   S
  note that the Downward Vision System cannot work properly on surfaces
  without clear pattern variations.
2. Turn on the aircraft. The aircraft hovers in place after takeoff. The Aircraft Status Indicators flash green
  twice, which indicates the Downward Vision System is working.
Using the Forward and Backward Vision Systems, the aircraft can actively brake when detecting
obstacles in front. The Forward and Backward Vision Systems work best with adequate lighting and
clearly marked or textured obstacles. To allow for sufficient time to break, the aircraft should not fly more
than 31 mph (50 kph) when flying forward or more than 27 mph (42 kph) when flying backward.
The Lateral Vision Systems requires better lighting and more textured or clearly marked obstacles,
and cannot sense dynamic objects, such as moving people, vehicles, tree branches, or blinking lights.
Lateral Vision Systems are only available in ActiveTrack 2.0 and Tripod Mode. The angular speed is
limited to 24° /s and the lateral flight speed is limited to 18 mph (29 mph).
        Lateral Vision Systems are only available in ActiveTrack 2.0 and Tripod Mode. Lateral Vision
        Systems have limited ability to sense and avoid obstacles, and the performance may be affected
        by the surrounding environment. Be sure to maintain line of sight with the aircraft and pay
        attention to prompts in DJI GO 4. DJI takes no responsibility for any aircraft that is damaged or
        lost while using Lateral Vision Systems.
        The Vision System cannot work properly over surfaces that DO NOT have clear pattern
        variations. The Vision System is only effective when the aircraft is at an altitude of 0.5 to 50
        meters. Please note that the Vision Positioning function may be affected if the aircraft’s altitude
        is above 33 ft (11 m).
        The Auxiliary Bottom Light is automatically enabled when the environment light is too weak.
        Please note that the Vision System cameras performance may be affected when the auxiliary
        bottom light is enabled. Fly with caution if the GPS signal is weak.
        The Vision System may NOT function properly when the aircraft is flying over water or snow-
        covered areas.
        Note that the Vision System may NOT function properly when the aircraft is flying too fast. Fly with
        caution when flying at over 10 m/s (32.8 ft/s) at 2 m (6.6 ft) or over 5m/s (16.4 ft) at 1 m (3.3 ft).
        Operate the aircraft cautiously when in any of the following situations:
        a. Flying over monochrome surfaces (e.g., pure black, pure white, pure green).
        b. Flying over highly reflective surfaces.
        c. Flying over water or transparent surfaces.
        d. Flying over moving surfaces or objects.
        e. Flying in an area where the lighting changes frequently or drastically.
        f. Flying over extremely dark (< 10 lux) or bright (> 40,000 lux) surfaces.
        g. Flying over surfaces that strongly reflect or absorb infrared waves (e.g., mirrors).
        h. Flying over surfaces without clear patterns or texture.
        i. Flying over surfaces with repeating identical patterns or textures (e.g., tiles with the same design).
        j. Flying over obstacles with small surface areas (e.g., tree branches).
22    © 2018 DJI All Rights Reserved.