DJI Phantom 3 SE инструкция

                                                                                                                                  Aircraft
                                                                            Phantom 3 SE User Manual
Battery Level Indicators While Charging
   LED1        LED2       LED3               LED4                       Battery Level
                                                                         0%~25%
                                                                         25%~50%
                                                                         50%~75%
                                                                        75%~100%
                                                                       Fully Charged
Battery Protection LED Display
The table below shows battery protection mechanisms and corresponding LED patterns.
Battery Level Indicators while Charging
 LED1   LED2   LED3   LED4     Blinking Pattern                       Battery Protection Item
                               LED2 blinks twice per second           Over current detected
                               LED2 blinks three times per second     Short circuit detected
                               LED3 blinks twice per second           Over charge detected
                               LED3 blinks three times per second     Over-voltage charger detected
                               LED4 blinks twice per second           Charging temperature is too low
                               LED4 blinks three times per second     Charging temperature is too high
After these issues are resolved, press the Power Button to turn off the Battery Level Indicator. Unplug the
Intelligent Flight Battery from the charger and plug it back in to resume charging. Note that you do not
need to unplug and plug in the charger in the event of a room temperature error; the charger will resume
charging when the temperature is within the allowable range.
      DJI does not take any responsibility for damage caused by third-party chargers.
      How to discharge your Intelligent Flight Battery:
      Slow : Place the Intelligent Flight Battery into the Phantom 3 SE’s Battery Compartment and turn
      it on. Leave it on until there is less than 8% of power left, or until the battery can no longer be
      turned on. Launch the DJI GO app to check battery levels.
      Rapid : Fly the Phantom 3 SE outdoors until there is less than 8% of power left, or until the
      battery can no longer be turned on.
                                                                     © 2017 DJI All Rights Reserved.    21
   Квадрокоптеры, стедикамы по лучшим ценам                             https://masterfly.ru