DJI Phantom 3 SE инструкция

                                                                                                                                               Aircraft
                                                                                            Phantom 3 SE User Manual
                                      If the aircraft is flying under 20 meters (65 feet) and Failsafe (including
                  20 m                Sma2r0t mRTH, Lower Battery RTH ) is triggered, the aircraft will first
                                      autoHmatically ascend to 20 meters (65 feet) from the current altitude. You
                                      can only cancel the ascending by exiting the Failsafe.
                                      Aircraft automatically descends and lands if RTH is triggered when the
20 m               20 m               aircraft flies within a 20 meters (65 feet) radius of the Home Point. Aircraft
                        H             will stop ascending and immediately return to the Home Point if you move
                                      the throttle stick if the aircraft reaches 20 meters (65 feet) altitudes or
                                      beyond during Failsafe.
                                      Aircraft cannot return to the Home Point when GPS signal is weak
                                       ([       ] displays grey) or unavailable.
                                      If you move the throttle stick after the aircraft rises above 65 feet
                                      (20m) but below the pre-set Failsafe RTH altitude, the aircraft will stop
                                      ascending and immediately return to the Home Point.
       Vision Positioning System
        The DJI Vision Positioning System uses ultrasound and image data to help the aircraft maintain its current
        position. With the help of Vision Positioning, your Phantom 3 SE can hover in place more precisely and fly
        indoors or in other environments where a GPS signal is not available. The main components of the Vision
        Positioning System are located on the bottom of your Phantom 3 SE; they include [1] one monocular
        camera and [2] two ultrasonic sensors.
                                                                                        [1]
                                                                                        [2]
        Using Vision Positioning
       Vision Positioning is activated automatically when the Phantom 3 SE is turned on. No further action
       is required. Vision Positioning is typically used in indoor environments, where GPS is unavailable.
                                                                                   © 2017 DJI All Rights Reserved.    15
         Квадрокоптеры, стедикамы по лучшим ценам                                           https://masterfly.ru