Aircraft Phantom 3 SE User Manual Propellers Silver Nut Black Nut Figure Attach On Motors without dots Motors with black dots Legends Lock : Turn the propellers in the indicated direction to mount and tighten.Unlock : Turn the propellers in the indicated direction to loosen and remove. Attaching the Propellers 1. Be sure to remove the warning stickers from the motors before attaching the propellers. 2. Attach the propellers with silver nuts onto the motors without dots and spin the propellers clockwise to secure them in place. Attach the propellers with black nuts onto the motors with black dots and spin the propellers counter-clockwise to secure them in place. Be sure to tighten each propeller by hand before flight. Check that the propellers and motors are installed correctly and firmly before every flight. ONLY use original DJI propellers for a better and safer flight experience. ONLY using the propller with the same model. Tighten the propellers with both hands before each flight. Ensure that all propellers are in good condition before each flight. DO NOT use aged, chipped, or broken propellers. Stand clear of the motors and DO NOT touch the propellers when they are spinning. Detaching the Propellers Put the propeller removal clamp around the motor, and pinch both sides as shown below to hold the mo- tor in place. Then rotate the propeller in the unlock direction to loosen it. © 2017 DJI All Rights Reserved. 17 Квадрокоптеры, стедикамы по лучшим ценам https://masterfly.ru