Razor E300 инструкция на русском - страница 9

                    Repair and Maintenance
q Adjusting the Chain                                                                                                           Note: This system of adjusters
Tools required: 10mm wrench, two (2) 8mm wrenches, and two (2) 17mm wrenches.                                                   is common to motorcycles
                                                                                                                                and BMX bicycles. If you are
                                                                                                                                not familiar with it or do not
                                                                                                                                feel comfortable performing
                                                                                                                                the adjustment, consult an
                                                                                                                                authorized Razor service center
                                                                                                                                or a qualified BMX bike or
                                                                                                                                motorcycle mechanic.
                                                                                                                                The chain should be “just taut”
                                                                                                                                – in other words snug, but not
                                                                                                                                piano-wire tight. The tension
1 Using two 17mm wrench-es, loosen the rear axle boltsby turning the wrenchescounter clockwise.2 Using two 8mm wrenches,3 Using a 10mm wrench,loosen the brake housingtighten the tension adjust-anchor bolt which is locateders on the axle 1/8 to 1/4in the long slot on the leftturn to fine-tune the chainside of the rear fork.tension. Both adjusters mustbe tightened the exact sameamount to maintain wheelalignment.should be similar to the fanchain on an automobile. BECAREFUL NOT TO ADJUST TOOTIGHT. The tensioning systemcan easily impart too muchtension and snap the chain orbend the motor shaft. Adjust1/8 to 1/4 turn at a time andcheck the tension each time.
4 Once the tension is
correct, tighten the axle bolts
and brake housing anchor
bolt. Test ride the scooter.
Readjust as needed.
q Battery Care and Disposal
Do not store the battery in temperatures above 75° or below -10° F.                                                                  WARNING: If a battery
                                                                                                                                leak develops, avoid contact with
                                                                                                                                the leaking acid and place the
      		           CONTAINS SEALED LEAD ACID BATTERIES. BATTERIES MUST BE RECYCLED.                                             damaged battery in a plastic bag.
Disposal: Your Razor product uses sealed lead-acid batteries which must be recycled or disposed of in an                        Refer to the disposal instructions at
environmentally safe manner. Do not dispose of a lead-acid battery in a fire. The battery may explode or leak. Do not           left. If acid comes into contact with
dispose of a lead-acid battery in your regular household trash. The incineration, land filling or mixing of sealed lead-        skin or eyes, flush with cool water
acid batteries with household trash is prohibited by law in most areas. Return exhausted batteries to a federal or state        for at least 15 minutes and contact
approved lead-acid battery recycler or a local seller of automotive batteries. If you live in Florida or Minnesota, it is       a physician.
prohibited by law to throw away lead-acid batteries in the municipal waste stream.
q ChargerThe charger supplied with the electric scooter should be regularly examined for damage to the cord, plug, enclosureand other parts and in the event of such damage, the product must not be charged until it has been repaired orreplaced.WARNING: Batteryposts, terminals and relatedaccessories contain lead and leadcompounds. Wash your hands
Use ONLY with the recommended charger.                                                                                          after handling.
q Wheels
Wheels and drive system are subject to normal wear and tear. It is the responsibility of the user to periodically inspect
wheels for excess wear and adjust and replace drive train components as required.
q Replacement Parts
The most frequently requested replacement parts are available for purchase at some Razor retail partners. For the
complete selection of replacement parts visit www.razor.com/shop.
q Repair Centers
For a list of authorized Razor repair centers:
• Check online at www.razor.com.
• Call 866-467-2967 for the center nearest you.
                                                                           8