USAGE How to Ride Note: Electric scooter must be Do not activate the thumb throttle unless you are on the Power A2 and in a safe, outdoor environment suitable for riding. moving at least 3 mph (5 km/h) Put kickstand up. while engaging throttle to engage motor. Press the power button (A), the LED will light up. Get on the scooter and place both hands on the handlebars. Kick to start (B), and then push the thumb throttle (C). C A B How to Stop For controlled stops, release the throttle and apply the brake by putting pressure on the rear-fender brake. Razor Note: As an additional safety recommends that you practice applying the brake at various speeds and in an open area free from obstructions before feature, the scooter is designed to riding your scooter around others. cut power to the motor when brake is applied. Note: Motor will re-engage, (without having to kick to start), if brake is released and throttle is applied before scooter has slowed down to under 3 mph (5 km/h). Note: Practice riding only in wide open areas clear from curbs, parking blocks and other obstacles. Impacting the wheels against any hard surface can damage the wheels. Wheels are not covered under the limited warranty. Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service contact information is listed at the back of this manual. 7