Razor Power A2 инструкция на русском

ASSEMBLY AND SET-UP
Unfolding the Scooter for First Time Use
WARNING:
Keep fingers clear of the pivoting
mechanism when folding or
unfolding the scooter. Make sure
others are standing clear.
Note: Remove plastic covers on rear axle bolt
before unfolding scooter.
1 To release the folding mechanism, place 2 Turn knob clockwise to tighten and engage the
the scooter on the ground. Pull the Anti-Rattle Anti-Rattle mechanism.
knob up to raise T-bar. Turn knob completely
counterclockwise then continuing raising T-bar
until T-bar is locked in the upright position.
Note: To activate the Anti-Rattle feature, turn the knob clockwise. Note there is no need to overtighten.
To fold, loosen the Anti-Rattle knob (by turning knob counterclockwise) prior to pulling up the
Anti-Rattle knob to release the folding mechanism. For instructions on folding see page 8.
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
4